Imperial Firebase

Working on the 2nd edition Imperial firebase.

I've not printed this yet to test fitting so once I start printing and fitting the pieces together, there may be some adjustments to the uploads.

For the pieces that used the necromunda bulkheads, I cheated and modified a couple from this set:
https://cults3d.com/en/3d-model/game/batch-o-bulkheads-for-scenic-crafters-necromunda

End of filename codes
L: Left
R: Right
M: Middle
TL: Top Left
TR: Top Right
RF: Right Front
RB: Right Back
LF: Left Front
LB: Left Back
BL: Back Left
BR: Back Right
TLB: Top Left Back
TLF: Top Left Front
TRB: Top Right Back
TRF: Top Right Front
B: Baack
F: Front
T: Top

Update 2/17/24: So my printer will be down for an undetermined amount of time. I need to acquire a new hotend and wires for my qidi x-one before I can print anything. So if you find any issues, please let me know and send pics so that I can try to fix it.

Update 3/18/24: I finally started printing this and after a couple pieces, realized it was much too big. I've resized the firebase to hopefully the correct size. I've also added a support for the center of the landing pad (main). I also missed a piece on the left side just behind the 2-story platform and noticed I had the storage building sides reversed. If you like the larger size, I left that. The new pieces for the corrected size start with RS_

Update 3/25/24: the re-sized landing pad (Parts MAIN_TBR, MAIN_TBL, MAIN_TFR, and MAIN_TFL) wasn't laying flat on the build plate so I shaved a couple layers off the bottom.

Update 3/31/24: Updated the Imperial_Firebase_Main_TLF to re-add the missing "X" Also shaved a couple layers off the RS Bunker sides (RS_Imperial_Firebase_Bunker_L and RS_Imperial_Firebase_Bunker_R) so that they lay flat on the printbed, Zipped all the RS parts as the new bunker pieces were too large individually.

Update4/7/24: Widened the long side of the walkway for the resized firebase as the terminal and pipes made it difficult to place figures there which also meant I had to elongate the back walkway wall (RS_Imperial_Firebase_Walkway and RS_Imperial_Firebase_WalkwayWall_B)