Summary

A full Crystal Star from Paper Mario: The Thousand-Year Door to celebrate the remake coming out for Nintendo Switch.

The STL model is 80mm in diameter and 32mm deep (or tall if flipped on the flat side).

Print Settings

Printer Brand:

CR-10 SE

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Creality</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.2mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>15-20%</p></div></p>                                                    <strong>Filament:</strong> Any PLA                White                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Flip the model on it's flat face in the slicer, it <em>should</em> print well with very minor issues on the underside.</p><p>I print at around 45mm/s, which may be slow. But I was able to print it without supports.</p></div>

Post-Printing

                <div><p>I used an X-acto knife to shave any little bumps left from the seam for that layer, then used Bondo Glazing and Spot Putty and filler primer to smooth out all of the faces with 120 and 220-320 grit sand paper.</p></div>