Summary

This is a model that would be called 'attached to the ear'. The millimeter I used is 6mm.
Print Settings

Printer Brand:
Creality
                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Ender-3 V2 Neo</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.16</p></div></p>                                                    <strong>Filament:</strong> PLA PLA                black                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>The speed will depend on the machine and the type of PLA you are using. I always recommend that the first layers be printed at a speed between 10% and 20% (although if you are confident and know that the bed is perfectly leveled, you can increase the speed of the first layer to 40%). After that, you can adjust the speed as needed, keeping it between 80% and 100%.</p><p>The 3D model of these rings does not require supports, but I always advise keeping them active in case of any minor detail that the ring may need (that varies depending on the program you are using or your machine).</p><p>Remember to add supports to ensure a proper attachment.🧀🧀</p><p>I'm a bit sleepy, can you help me with a beer? It's to keep creating things 👽🤘 buymeacoffee.com/instintkiller<br>or follow in instagram @instintkiller_  /  @depulga<br>tiktok @flea3d<br>Can you help me with a like or a follow?</p></div>
Earring star big pendant
