Summary

Mr. Bump of the Mr. Men & Little Miss series. Mr. Bump's parts are held together by his topmost bandage, which screws onto a shaft attached to his feet. Glue not needed but might help keep him together.

Print Settings

Printer Brand:

Creality

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Ender 3 Pro</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>.08mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>20%</p></div></p>                                                    <strong>Filament:</strong> eSun PLA                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>NB: Mr. Bump was designed as a single model and then sliced apart. This means the various bandage parts were created in situ and will not simply sit flat on the print bed unless you take care to make them do so. Also pay attention to the orientation in which you print the eyes and mouth.</p><p>The bandages are numbered from bottom to top (that is, in the order you'd stack them up).</p><p>If your slicer supports variable infill, it might be useful to print 'Feet Body Lower and Rod' with 100% infill starting at 21mm. This will help prevent the threads from breaking off when you tighten everything together.</p><p>The pictured print was done with .08mm layer height (for detail) but other heights will work as well.</p></div>