Summary

Este modelo es un diseño sencillo de pendientes Árbol de Navidad.

Print Settings

Notes:

The speed will depend on the machine and the type of PLA you are using. I always recommend that the first layers be printed at a speed between 10% and 20% (although if you are confident and know that the bed is perfectly leveled, you can increase the speed of the first layer to 40%). After that, you can adjust the speed as needed, keeping it between 80% and 100%.

Remember to add supports to ensure a proper attachment.🧀🧀

but I always advise keeping them active in case of any minor detail that the ring may need (that varies depending on the program you are using or your machine).

I'm a bit sleepy, can you help me with a beer? It's to keep creating things 👽🤘 buymeacoffee.com/instintkiller
or follow in instagram @instintkiller_ / @depulga
tiktok @flea3d
Can you help me with a like or a follow?

Earring ÁRBOL DE NAVIDAD christmas tree