Summary

Lens shape with a solid base for heat forming or vacuum forming lenses to fit the frames.
Mould will need to be mirrored for right lens.

Print Settings

Printer Brand:

Anycubic

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Kobra 2</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.2mm`</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>4%</p></div></p>                                                    <strong>Filament:</strong> Anycubic PLA                Black

How I Designed This

I took the original lens, extruded it down, and flattened the bottom. This let me take a honeycomb mesh stl (linked below), heat it up, and form it over the solid block. After trimming it to shape I was able to glue it right onto the original lens frames and mount them to the shell.

Honeycomb Mesh: https://www.thingiverse.com/thing:4801337

Ben Riley Spider-Man Lens Forming Mould