Cambium Yo-Yo design

cambium_2.5diameter_and_1.25wide_v1.stl: This is the file I made in an attempt to get my one piece fixed axle wooden yo-yo design, the Cambium, made. When I couldn't find a manufacturer I ended up 3d printing it and found it played rather nicely. I had to print it vertically to get it to print okay but it definitely worked. I printed this at 20% infill. Could be an easy way to get a yo-yo without having to go to the store, but it would be faster to go to the store.

full_fill_cambium.stl: I also added my 'full fill cambium' to the STLs. This has been hollowed out because I wanted to print the design at 100% infill and it was way to heavy with the original design. If you want to print with resin, this is probably the file to go with.

wider_full_cambium.stl: I also widened the full fill Cambium design to get it closer to the width of the initial Cambium design.