HSW Flush-cutter Toaster

This is a fun little way to store up to two flush cutters on a (Hexagonal/Honeycomb) Storage Wall (compatible with other storage wall standards with the printing of a separate adapter you may need to alter yourself).

While I was designing a mount for the HSW system to store my two flush cutters, I decided that from the top it looked like a toaster. It was a pretty easy decision to continue on that route!

The printed example in the pictures is done on a Bambu Lab X1 Carbon with AMS, but you don't need to print in multi-color.

To color the toaster using the Bambu Lab Slicer in the same fashion as the example image, use a "level" fill to color the top of the toaster, then a "fill" to do the lever and dial. Pretty simple.

Should be able to print without supports, and between 0.08 to 0.2 layer heights without issues.