Hexacopter (HC-FIRESTORM) By. JAROLIX

This is my first multicopter design, inspired by a DJI 550.
The wingspan is 580mm and is compatible with props up to 10". My setup has 2212 sized DJI 920kv motors and 30A Mystery -SimonK ESC.

Ardupilot system APM 2.6,ext GPS+compass, telemetry.
GoPro+ video transmitter.

Im using 3300mAh 4s battery and has ~12-15min flight time atm.
But two new 5000mAh 4s is ordered such as new 9047 carbon props :)

Print time: @90mm/s ~36h, PLA 210c / 50c heatbed. ~500g @ 30% infill.

First test Video:
3300mAh, 8045 carbon props.
https://www.youtube.com/watch?v=NKppJZULv7Y
"Night-flight" leds: https://www.youtube.com/watch?v=dHxybphx4TY

This is a on going project and i will upload new files along progress is made.

Future work:
LEDs, gimbal, latger battery bank, 9" props.

I am not the designer of the gimbal/motors/antenna/props or the gopro.