Summary

This is a custom-made BoBF gauntlet hose sleeve to simulate the real ones used, which were Airbrush air hose connectors and covered with heat shrink wrap.
I've included a remixed version of the "connectors" to accommodate a 6mm OD aluminum pipe.

The connectors and the wrap I would recommend using a Resin printer, but the wrap is better in PLA+ or ABS filament at 0.2 layer height.

Print Settings

Printer Brand:

Creality

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>CR-10S4</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.2</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>100% recommended.</p></div></p>                                                    <strong>Filament:</strong> Any PLA+                Black recommended, but any color could work.

How I Designed This

I used 123D Design for the remix and creation of the hose cover.

Book of Boba Fett Gauntlet Connectors