Jotaro and Star Platinum wall art/stencil

Wall art I made for a friend of mine. The whole print is made of continuous lines, so it will come off in one piece. If you want to print it in a bigger size, print the two halves separately and glue them together. If you're using Cura, I recommend you enable ironing, combing, as well as retraction. No support or extra plate adhesion is required. The project looks best at a height of 2-3 mm. If you're using a weaker filament, i suggest sizing up the project by 10-20% in order to make sure all the walls are thicker than 1 mm. Enjoy!