TWCS Throttle Detente with 10, 50, and 90% detentes

This is a revised A320 Throttle Detent for the TWCS to allow for a generic 10, 50, and 90 degree detente with a revised detente runner, label, as well as an improved detente attached to the throttle for better contact, easier to print, better feel, easy to assemble, and more effective indexing for position.

It is designed to be installed with 3M heavy duty double sided mounting tape.
https://www.amazon.com/gp/product/B007Y7H5GO/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Printing

1. Print the detente part sideways such that the curve of the detente is is parallel with the build plate for smoothness.

2. Make sure the throttle reinforcement is printed with a face fully in contact with the base plate

Assembly:

1. Apply tape to the interface between the throttle reinforced and the Throttle

2. Apply tape between the Base and the Throttle base

3. Apply tape on the "detente" that connects to the base.

4. Install detente and into label into Base. Make sure the labels line up with the detente position on install.

Post work:

1. You may want to Sand the Detente for smoother operation with high grit sand paper
2. You could use grease on the detente if you want it to be even smoother.

See original developer for fitment images
https://www.thingiverse.com/thing:6437037

IPT's attached for modification.