Summary

This design is a replica of the plate that holds the lens on the Graflex Speed Graphic 4x5 camera. Mine was missing when I got the camera so I decided to make my own one. This design has been tested with the Wollensak 101mm f4.5 lens.

I added a .step file along with the stl to make editing the design easier.

Feel free to comment suggestions or remix the design if you want to :).

Print Settings

Printer Brand:

ELEGOO

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>ELEGOO NEPTUNE 4 Plus</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.2mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>99%</p></div></p>                                                    <strong>Filament:</strong> ELEGOO PLA                Black                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>I use 99% infill to reduce the chance of light leaks and make the print more sturdy. You can try 25% as well, but you may need spray paint to cover any holes. I got a light tight print at 99% infill. Also I would recommend using black filament to (again) reduce light leaks.</p></div>

Graflex 4x5 Lens Holder