Cheapino V2 case (3rd iteration)

Case for version 2 of the cheapino.

This is mainly for the hotswap version, you can use it soldered, but then you need to solder the switches after inserting them in the case+pcb...

You also need m2 melt inserts and screws(around 5mm length). I recommend printing with 100% infill for best sound/feel.

https://github.com/tompi/cheapino

P.S. The version with covered mcu and rj45 is made by @azzamsa, see: https://www.reddit.com/r/ErgoMechKeyboards/comments/1hupa1c/cheapino_v2_with_mcu_cover