Summary

Made for my father, couldn't find anything similar so made my own. Thought others could use.

Internal diameter is 60mm, since moth scabbard taper it should slot right in.

Though not what it's designed for, you should be able to support full weight of scabbard with sword, you'd be limited by your anchor system. I printed this with 50% infill and 4 walls for added strength and it's very strong.

Print Settings

Printer Brand:

ELEGOO

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>ELEGOO NEPTUNE 4 Pro</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>Any</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>20%+</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>4 walls for extra strength, I'd go higher on infill if you're planning on putting the weight of an entire sword in it. It's not a big part so even high infill won't take too long.</p><p>I printed at 0.12 for extra nice finish but 0.2 or even 0.3 should be fine as well.</p><p>Print flat with supports, base of curve needs supporting.</p></div>

Wall Mounted Scabbard (+ Sword) Vertical Display