Summary

This is a simple light saber wall mount, but can be used to hold other prop weapons on the wall to display. When printed at 100% size, it screws to the wall (or any vertical surface) using a #8 pan head screw with a head diameter of 11 mm. The radius in the arm should be sufficient to cradle most sizes of lightsaber. This was designed using FreeCAD, sliced using Orcaslicer, and printed on a Creality K1C in PLA. It should not need supports or rafts.

Print Settings

Printer Brand:

Creality

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>K1</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.16 mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>30%</p></div></p>                                                    <strong>Filament:</strong> Spectrum Filament r-PLA                Black

Simple Lightsaber Wall Mount