Summary

Helps solder the individual wires to the trigger paddles before installing them into the controller. This is a pretty finicky process with a typical 3rd hand alligator clip in my opinion, and since these are worth making these days with the upgraded paddle design from the Phob project, I was tired of doing them the hard way. So I made this!

Print Settings

Printer Brand:

Bambulabs

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Bambu P1S</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.2</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>15% Gyroid</p></div></p>                                                    <strong>Filament:</strong> Polymaker PolyLite PETG                Black                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>I also turned down wall overlap to 10%, internal solid infil to monotonic, turned on "Avoid crossing wall", and turned top surface speed down a bit. These are mostly settings specific to printing this particular PETG filament on my particular printer, so YMMV</p></div>

Gamecube Controller Paddle Helper