Summary

Created for Nitecore MH12 PRO to fit with the 32mm Red Light Adapter MFR32. Not recommended as a long-term solution. This is only meant to be a temporary solution until a filter of suitable size is brought into the market.

Only designed for this purpose in mind, so job done. Feel free to take it further if needed.

Print Settings

Printer Brand:

Creality

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Ender-3 V3 SE</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                    <strong>Filament:</strong> Sunlu PLA                Grey                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Created for Nitecore MH12 PRO to fit with the 32mm Red Light Adapter MFR32. Not recommended as a long-term solution. This is only meant to be a temporary solution until a filter of suitable size is brought into the market.</p></div>

Post-Printing

Usage

            <div><p>Slide it over the light and put the adapter on. It should stay on, if you want more security just use double-sided tape on the MFR32. </p></div>                    <p class="detail-caption"><strong>Print</strong></p>            <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/b4/8b/b6/b0/35/1410cbda-fee0-4754-a4db-c48a4989fe22.jpg"></p>                <p class="detail-caption"><strong>Place in filter</strong></p>            <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/55/a4/71/7d/a9/cbea7cc5-79c9-47ce-84f3-a26533a03a06.jpg"></p>                <p class="detail-caption"><strong>push to fit</strong></p>            <p class="detail-image"><img src="https://cdn.thingiverse.com/assets/dd/be/7e/66/f5/f30d0f1e-59e3-43c7-95f5-8fd31af1e938.jpg"></p>

How I Designed This

Requirements

            <div><p>Provide an immediate fix for the Nitecore MH12 Pro using an MFR32 Adapter</p></div>                <p class="detail-title"><strong>Designed using KISS principle</strong></p>            <div><p>Start by breaking it down into a 26.8mm circumference for the MH12 Pro front end and a 32mm circumference for the Red Light Filter.</p><p>Draw a 32mm circle and remove a 27mm hole(.2mm is too small to care).<br>extend the circle to a height of 120mm to fit onto the light with as much surface area as possible without interfering with the light.</p><p>Cut a relief gap in the cylinder and Voila! It's done.</p></div>

Project Shiny Luulia