Summary

Use Tree supports to help reduce failure rate. You can make the walls thicker if you need more support, but as made works for me fine.

This allows you to hook up the exhaust port of the xTool S1 3" to 4.5" inlet port for VF6000 shop vacuum hepa filter. You will still need to plug the hole in the bottom of the Hepa filter.

Also I recommend sealing the exhaust to adapter with either silicone tape or duct tape.

Print Settings

Printer Brand:

Bambulabs

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Bambu P1S</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                    <strong>Filament:</strong> Generic ABS ABS                White                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Use Tree supports to help reduce failure rate. You can make the walls thicker if you need more support, but as made works for me fine.</p><p>This allows you to hook up the exhaust port of the xTool S1 3" to 4.5" inlet port for VF6000 shop vacuum hepa filter. You will still need to plug the hole in the bottom of the Hepa filter.</p><p>Also I recommend sealing the exhaust to adapter with either silicone tape or duct tape.</p></div>

xTool S1 exhaust to Hepa Filter inlet