Summary

This one has 6 gears for even more fun!
I designed this in Alibre V25. Print six gears and two side pieces. Print the side pieces with the pins facing up. I glued the thing together with crazy glue. Wipe a bit of glue on the ends of the alignment pins on the side pieces.Be careful not to apply too much or the gears will get glued to the side and not spin. No big deal to make or assemble, but fun to fiddle with.

Print Settings

Printer Brand:

Prusa

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>I3 MK3S</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>.2 is ok</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>25 percent</p></div></p>                                                    <strong>Filament:</strong> I like Esun  PLA                any

How I Designed This

I used Alibre V25 for design

Herring Bone 6 gear spinner. 6 times the fun!