Summary

These are Dew Shields which I designed for fitting to my two Newtonian telescopes.

I printed both in PLA.

The 96mm fits snug to the 76mm telescope.
The 130mm I use with my 130mm National Geographic. I use fireplace insulator with sticky side to give some chushion hight and keep it snugg fit.

Print Settings

Printer Brand:

Creality

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Ender-3 Max</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                    <strong>Filament:</strong> Amazon generic PLA                Black                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>The small one I designed it with 2mm thickness.<br>The large one I reduced to 1.4mm thickness to reduce weight and still printed properly.</p><p>If you have auto leveling please enure your printer code is set to use the autoleveling data or else will distort the print as is a very tall object. Was a thogh learning for me. At least Ender 3 does not uses the learned data without printer code adaptation.</p></div>

Post-Printing

            <p class="detail-caption"><strong>Printed dew shields. They have around 190mm hight. I used sandpaper inside to remove the glow of printed filament.</strong></p>

Dew Shield for 76 and 130 mm Newtonian