Top strap for Pimax Crystal

List of components to print:

1. head_cap - TPU
2. cover1 - PETG
3. cover2a - PETG
4. cover2b - PETG
5. wheel - PETG
6. knob - PETG
7. right_strap - PETG
8. left_strap - PETG
9. right_pin - PETG
10. left_pin - PETG
11. Pin_wheel - PETG (x2)

The rotating wheel has characteristic clicking sounds.
Fore-aft adjustment is done gradually by clicking.

The stip is designed for the Pimax Crystal Light, as I am the owner. But it should also fit the Crystal.
For mounting with the headset I used the existing screws.
The strips are printed flat. At 0.8mm thick, they have enough flexibility to be properly bended during assembly.