New Pi Media Centre

This is a work in progress. As a result of trying to cram in a Pi, a 2.5" hard disk and a powered USB hub my original design was somewhat cramped. Limited by the bed size of my Makerbot 2X, I have re-jigged the internals to accomodate everything needed. I got a 2.5" hard disk SATA to USB cable for £5 (Amazon) and a 5volt 3amp PSU (Amazon £10). I moved the Hard Disk mounts 10mm back and added 5mm on the left for the USB hub. It is now tight on the bed of our Makerbot 2X but should fit OK. I moved the 60mm fan mount forwards to avoid the USB hub, I also found a 5mm deep 60mm fan which saved space