M.2 SSD Adapter to 2,5"

This is an adapter to 2,5" for more or less common m.2 SATA SSD to SATA Adapter-PCB.
As far as i found out there are at least 2 different ones (see pictures) - the green one is 5mm smaller than the black one.

I have made the Adapters to be 9,5mm in thickness but this can be altered easily in FreeCAD by changing the thickness of "Pad", If you set this to 7mm then the base will be very thin and brittle. After that select "Body" and export as .stl. Be aware that the generated STL is upside down - you need to flip it 180°

The provided STL Files are already flipped.

The PCB just slots into the adapter - no screws or so needed. You might need to install the SSD prior to slot in.

The Adapters are slightly longer than a regular 2,5" SSD/HDD as the PCB is longer, too.