Gundam Stand
(2-layer) screws needed:
M3--8: 2 pieces
M3--20: 2 pieces
M3--22: 1 piece
M3 nuts: 5 pieces
For the first layer, use "Main_ShaftM3_Screw_Hole" with 2 pieces, assembled in reverse, with "Support_Axis" in between.
For the second layer, use "Main_ShaftM3_Nut_Hole" with 2 pieces, also assembled in reverse.
These two will fit perfectly together when assembled with M3*8 screws and nuts.
If necessary, additional layers can be added.
Refer to the picture for the remaining assembly.
(2層)需要螺絲
M3--8 2個
M3--20 2個
M3--22 1個
M3螺帽 5個
第一層用"主軸(M3螺絲孔)Main_ShaftM3_Screw_Hole"2個，顛倒組合，中間要加"支撐軸(Support_Axis)"
第二層用"主軸(M3螺帽孔)Main_ShaftM3_Nut_Hole"2個，一樣顛倒組合
這樣兩個會剛好可以再用M3*8螺絲螺帽組合
如果需要可以再繼續組合
剩下可以看圖片組合