Summary

Cab including roof roof and boom supports for SIKU 3850 as they are often lost by now, its quite an old model.Decals too.
Print Settings

Printer Brand:
Prusa
                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>MINI+</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.25 nozzle, 0.1mm layer</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>50%</p></div></p>                                                    <strong>Filament:</strong> Filimentium ASA                Natural and Silver                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>I bought a cheap box of Siku models and a boxed but cab less harvester was included. As a 1:32 modeller its just what my Prusa is always being asked to do. It is a series of parts, they glue with solvent (MEK) which is a bit nasty but works. It's flat because that's easy to get the ASA to behave that way and minimal waste from supports. The boom supports are because mine were missing and they have a hook to secure it up for travel or a bit to stop it just dropping down. Nothing fancy but hopefully save somebody else the design time. One cab side is the mirror of the other. The print on the harvester is about 1mm shorter than the final version which will fit better at the rear. It is also PLA but the finished version is ASA to be more play friendly outdoors. 2 cab fronts, 1 could be lights rather than print the original decal, one smooth in case you want to. PDF of printable decals included as these seem to get damaged or wonky too. I used self adhesive vinyl, clear and white.</p></div>
Siku 3850 3950 4052 4051 cab and boom supports
