Fluke TPAK Holder

Welcome to my design!

About

This design is my version of the Fluke TPAK hook. I made this attachment to allow me to hang my meter on electrical panels and Romex wires. I have two versions one with a cutout for magnetics and one without. The magnetics cut outs have a diameter of 15.15 mm and a depth of 1.95 mm. You might want to change the magnetics as the ones I used aren't that strong and will not support the weight of the meter. I will update if I find better magnetics.

Compatibility

Should be compatibile with all Flukes that have the cut out for TPAK. I have a Fluke 116 that is shown in the photos.

Print Settings

• Infill at least 50%
• Print in PLA, ABS or PETG
• Any resolution
• Supports are needed