Summary

pc-12 throttle set for the honeycomb bravo
Print Settings

Printer Brand:
QIDI
                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Max 3</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>.2</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>20% triangle</p></div></p>                                                    <strong>Filament:</strong> sunlu pla                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>print the arms on their side. print the base with the arm hole facing the down on the build plate. For the manual knob lay on side to print and print slow. I suggest  40mm inner wall 30mmm outer wall 50mm infill. print at .14 layer height and 200 on the nozzle . Place close to aux blower fan if you have 1 hole opening facing fan. all other parts .2 layer<br>.4 nozzle<br>.2 layer<br>5 walls<br>6 tops and bottoms</p><p>dont use petg for the arms its not stiff enough unless you try petg cf that may work .<br>My throttle knob is printed using PBT-CF from CC3d great stuff very strong like nylon. i used .24 layers on that due to the CF . </p></div>
pc12 throttle set for the honeycomb bravo
