Summary

This Nozzle will fit the ToPump TPS300 and Excursion Pro Kayak K2. Other variations may work.

NozzlelBody2 and NozzleBody3 fit inside of NozelBody1. May need some superglue to keep them from moving.

NozzleBody2 and NozzleBody3 are printed so the two flat sides lengths are on the build plate.
NozzleBody1 is printed so the biggest side is on the build plate.

2 and 3 fit inside of 1. See picture. May need a hammer.

Should not need supports.

Print Settings

Printer Brand:

Creality

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Ender 3 Pro</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>.2mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>100%</p></div></p>                                                    <strong>Filament:</strong> Any PETG                Any                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>If you make this with PLA it will melt in your car in the hot sun.</p></div>

Intex Excursion Pro Kayak K2 to ToPump Air Pump Nozzle