Summary

Gaming handles for iPhone 15 Plus.
It is designed to sit on a basic phone case.

Everything has a Flat surface so it's easy to print and requires support.
You will need M4/5 10mm long wood screws to connect the rounded back to the handles and a 2/2.5 mm wide rubber band to connect the two halves, altho will work without it.

Print Settings

Rafts:

No

                                            <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.2</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>20%/30%</p></div></p>                                                    <strong>Filament:</strong> ELEG PLA                Black                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Everything has a Flat surface so it's easy to print and requires support.<br>You will need M4/5 10mm long wood screws to connect the rounded back to the handles and a 2/2.5 mm wide rubber band to connect the two halves, altho will work without it. </p></div>

Iphone 15 Plus Gaming Hendels