Metric Tap Set Case
Designed this enclosure to go together with small carbide drills, magnets, and tap set from Aliexpress:
Magnets (6mm x 1.6mm):
https://nl.aliexpress.com/item/1005005884332595.html?spm=a2g0o.order_list.order_list_main.109.6d7079d2rjVKYe&gatewayAdapt=glo2nld
For some reason the magnets mention 2mm in the order, but mine where 1.6mm in height.
The lid is connected using a >20mm screw that is tapped into the lid.
You can of course use the tap that will be stored in the case later.
There might be some errors in the step file caused by the "M" letters...
I just used the "repair" function that is present in the Bambu Studio slicer and did not bother to fix the .STEP file itself.
Same for the colors of the text, I used the slicer software to make them different colors.
Edit 2024-09-25:
Included the Fusion360 files and separate STEP files for the lid and base.
If you want to rotate the text on the lid this should be possible via the Fusion360 project file.