Al Capone with Colt 45

Al Capone with his Colt 45.

Get the free color .3MF file version here: https://makerworld.com/en/models/600498

During the slice there is a good chunky pause at 25%, but just wait it will happen.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm

The Model is 200x133.45mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ IIID Max Red Transmission Distance: 4
PLA+ Sunlu Pure Yellow Transmission Distance: 5
PLA+ Sunlu White Transmission Distance: 5

This print uses 4 unique filaments

Swap Instructions:

Start with Black
At layer #7 (0.72mm) swap to Red
At layer #12 (1.12mm) swap to Pure Yellow
At layer #17 (1.52mm) swap to White for the rest.

Grab my newest file releases FREE before they get released on other platforms by clicking here: https://makerworld.com/en/@zigzag