SETI - board game insert

This is an insert for the board game SETI - published by CGE (my german version is from HeidelBÄR Games).

This insert will NOT fit sleeved cards.

This is still a work in progress - i'm currently printing out the parts, if i'm satisfied with the results, i'll update this entry.

All the covers/lids should hold if you press it on the boxes - i did put it on and removed it a couple of times to get it off a bit easier.

I did add the amount of times each single part has to be printed in the filename (the x1 right before the .stl means print it once, x2 means twice etc.).

Don't be confused about needing to print the cover for the player parts more than the player parts themselves - one will be used for the "alien parts big" box.

This was created with onshape, you can copy & edit (or just view) it here

CURRENT STATE OF PROGRESS
since people are asking, this is the list of parts and the current state, i'll try to keep it up to date until everything is printed (see changelog below):

Legend:
🖨 needs still to be printed & checked
🔧 printed, but needs some adjustments
✅ printed, looks good! (keep in mind that i still need to do a final check to see if everything fits the box as it should once everything is printed)

🖨 Alien_Parts_Big_x1.stl
Box for Oumuamua

🖨 Alien_Parts_Small_Cover_x5.stl
Lids for the alien part boxes

🖨 Alien_Parts_Small_x5.stl
Boxes for aliens (& single player cards)

🔧 Cards_Cover_x1.stl
Lid for cards

🔧 Cards_x1.stl
Box for cards

✅ Credits_And_Energy_Cover_x2.stl
Lid for credits & energy

✅ Credits_And_Energy_x2.stl
Box for credits & energy

✅ Data_Tokens_Cover_x1.stl
Lid for data tokens

✅ Data_Tokens_x1.stl
Box for data tokens

✅ Filler_1_x1.stl
Filler to hold things in place & place to hold the sun

✅ Filler_2_x1.stl
Filler to hold things in place

✅ Filler_3_x1.stl
Filler to hold things in place

✅ Goals_And_Moon_Filler_x1.stl
Filler to hold things in place & places to put the moon & the gold scoring tiles

✅ Player_Parts_Cover_x5.stl
Lids for the player part boxes

✅ Player_Parts_x4.stl
Boxes for the player parts

🔧 Research Cover_x3.stl'
Lids for the research tiles

✅ Research_x3.stl
Boxes for the research tiles (& the 2 points score markers)

🔧 Single_Player_Goals_Cover_x1.stl
Lid for the single player goals box

🔧 Single_Player_Goals_x1.stl
Box for the single player goals

Changelog
Oct 11th: i'm still printing, but most changes will not affect the sizes of the parts, and since it all does fit (very tightly) into my box, i'm confident about the end result. i did reduce the sizes of Filler_1_x1.stl, Filler_2_x1.stl & Filler_3_x1.stl just by 1mm so it's not as tight of a fit as it now, i did also add a bottom at the space for the sun (in Filler_1_x1.stl), so it's base does not get caught under the insert.

Oct 10th: i'm not happy with the box & lid for the cards, made a little adjustment and added it back to the printing queue