KingSong s16 Pro Top Panel (mod)

Top panel for KingSong s16Pro wheel.

Not copy : made some changes :

1. Lower edge was removed - to put a flat gasket.
2. Height was increased and the bevel at the back was removed - to make it easier to move the USB board up under the panel.

v1 changes :

1. Moved screw holes 0.5 mm wider to take into account plastic shrinkage.
2. Changed back angle for printing it without supports.

back_v1_button_hole.STL - back with hole for button 11mm.

WARNING : I tried installing only model of halves... because my 3D printer is small...