Brompton "Improved" Tooltray

Looking for a tooltray for my older brompton, The model availible on here was too flimsy for my liking and was soo small compared the the space I had to fit it.

So I paid for one of the cheaper ones availible on the bay (https://www.ebay.co.uk/itm/226386079347?_skw=brompton+tool+kit&itmmeta=01JA2Q45AK16ASP629WDQYW4HS&hash=item34b5a96e73%3Ag%3AVowAAOSwpPNnAYDk&itmprp=enc%3AAQAJAAAA8HoV3kP08IDx%2BKZ9MfhVJKmphefSIHs2jo6vubQgyVxqLLPkCPxov9V37n8A4VSCobHJpBeM1k2lDdnBA%2BXKf%2B0YJV96e6%2B6GHCUBUlWZq%2FXoIF3NUeYKAUJ7lNi4JpvjnVpRi8Cxe3Oa8IQwEc0R9%2FpzwqKviTgYY%2BE%2B9UN30E0qylJArMK2uoG8BnXoEtE1fHfOyFpdHDVO6XizHn%2F5VK3lRJMi2awtt7hgqK4IaUEwQfmver%2FVTTIH%2FklYSMhlJZ9Rnpyi%2FfmWK%2BgRn0%2F43eGXtvbpvPGrLHTHH54XrJ%2Fq21lRniaqNGaGnaJ3zzixw%3D%3D%7Ctkp%3ABFBMsNWQ19Bk&var=525576484853)

Again was WAY smaller then wanted.

So I took the spanner and maget from the comercially availible one and modeled my own which is a nice snug fit in the top tube of MY brompton and fits the tools I require, a modified Topeak x-tool (I removed the torx bit and put a flat screwdriver in instead which Im much more likly to use) a tyre lever (https://www.thingiverse.com/thing:3005323 just tweaked the size slightly 7mm x 100mm x15mm so it fits I rarely need a tyre lever and only use one when I do), The 15,10 and 8mm wrench from the original tooltray, room for some patches which are on order and there is still a little room so I may put some 1/4" driver bits in and modify the tyre lever.

Ive modelled in a space for the magnet but the hole will need drilling for the screw.

A bit of foam on top of everything should keep rattles at bay.

PLEASE NOTE. My brompton had a broken frount hinge portion when I brought it so I made a whole new frount end from the hinge forward and it may not match a factory one so you may have to scale to fit, Also my brompton is OLD! I dont think this will fit with the newer style hinges. Im more than happy to modify it but I dont have a newer brompton availible to measure.