Summary

Remixed shellholder stand to shrink down size (I didn't want or need the label foot,) bevel the edges, and incorporate 3 mini Harbor Freight rare earth magnets underneath to attach it to my Inline Fabrication quick change bench top plates. Printed on my Kobra 2 Pro.

Print Settings

Printer Brand:

Anycubic

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Kobra 2</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>.2mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>25%</p></div></p>                                                    <strong>Filament:</strong> Anycubic PETG                Gray                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Nozzle Temp-245<br>Bed Temp-78<br>Perimeter Speed 120mm/s</p></div>

Post-Printing

Cleaup and Magnets

            <div><p>Cleaned any sharp edges with a deburring tool, flashed off any minimal stringing with a butane lighter. </p><p>Magnets press-fit in nicely, and are secured with a tiny dot of industrial grade super glue. </p><p>PETG filament is largely resistant to any common shop oils and solvents to the best of my knowledge. </p></div>

Magnetic Shellholder Stand for Single Stage Shellholders