Summary

Here is a replacement grommet for the Astro City mini arcade stick if you need to replace a damaged cable or in my case want a longer one. Modelled from the original.

Recommended to print in TPU or other flexible material.

Print Settings

Printer Brand:

Prusa

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>I3 MK3S</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.20</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>100%</p></div></p>                                                    <strong>Filament:</strong> Overture TPU                Black

Post-Printing

The hole through the grommet is to suit a shielded USB cable approx 4.5mm in diameter. You may find the hole clogged up with TPU after printing. I managed to clean it out by using a 5mm drill bit heated briefly with a butane torch. When drilled, the heated bit cleaned it out nicely.

SEGA Astro City Mini arcade stick cable grommet