Summary

That's replica of CRT-viewfinder Sony HVC-10 trinicon camera connector. Used if you need to add LCD-screen or kind of AMCAP device and get better (color) preview image.

Made using photos and other informaiton from Fagear (https://www.youtube.com/@fagear)

Print Settings

Printer Brand:

Formlabs

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Formlabs Form 3L</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.025</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>100</p></div></p>                                                    <strong>Filament:</strong> Formlabs CRv5                Clear                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Internal of that connector require hihg precision due to construction of other part, so it is necessary to use SLA printing, but shell is more cosmetical part. It's printed usinf FDM printer, resolution 0.12, infill 50%, TOUGH-PLA filament.</p></div>

Post-Printing

Make shure if all parts inserts into their positions, polish them if not. Also it's necessary to shure that mounting holes for pins is 0.7mm diameter. If diameter less than 0.7mm use 0.65mm milling cutter (usualy used for boards with 1.27mm step pins). If diameter more that 0.7mm - you should re-print connector part.

Assembly

Pins: PogoPin P50-B1
Rod: ?

Insert pins from front side of connector.
Solder wires to pins. Use minimal possible temperature and contact time.
Push pins into connector until they collide with detent.
Fix pins in the connector using glue (?).
Solder wire to rod and insert it from back side of connector.
Fix rod with gluse if necessary.
Pass wires trough 8-angle hole and their housing.
Insert connector part into the main part of shell at selected position (any of 8).
Place shell cover and fix it with diclorethane or another glue.

SONY HVC-10 viewfinder connector