Drill Bit Wall Organiser (Metric 10-1mm)

A storage solution for Metric Drill bits from 10mm down to 1mm in increments of .5mm. Designed for wall mount and on an angle for confined places.
Instead of just one drill bit, often it's handy to have a few on hand. Most of my drill bits are just the standard lengths as seen in the picture included. The idea is they all end up being the same height when stocked up. Trouble is, the ones in front block the numbers for the back row. A slight oversight.
The OP Drill Bit organiser seen in the photos has been updated since. The new version can fit more drill bits in each bin and print time has been reduced by 4 hours.
I print at around 65mm/s for perimeters and up to 80mm/s for fill etc. It should take around 8-9 hours with a .6mm nozzle and .3mm layer height.
There's a bin at the back for storage.
Future plans are to extend it to include up to 13mm and separate ones for Masonry and for Tapping drill bits.