Summary

I didn't like the two halves of the blade being split and put the two halves together. I also put the two halves of the handle together as in my first make, I could see the threaded rod inside. The first piece of the blade didn't make sense to combine

Print vertically to maintain the hole in the middle. Threads perfectly onto a 5/16" (7.9 mm) threaded rod. I used a wing nut to tighten down the blade sections while the glue was drying.

Print Settings

Printer Brand:

Creality

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Ender-3 V2 Neo</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.3 mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>40%</p></div></p>                                                    <strong>Filament:</strong> Overture PLA+                Light Grey                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>The PLA+ lists 190 °C - 220 °C for the nozzle temperature but I had success at 232 °C.</p></div>

Non-split Master Sword Blade