Summary

A smaller version of my magnetic wool holder.

This one only requires 2 magnets and the screw is replaced with glue.

This one cannot hold as much weight as the original, but would be perfect for smaller, light weight materials.

Print Settings

Printer Brand:

Anycubic

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Kobra 2</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>.2mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>10%</p></div></p>                                                        <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Print the spindle itself with at least 30% infill.<br>To print the hood, I stood it upright, and used a 5 mm brim to hold it in place.</p><p>You will also need 2 10mm diameter, 2.5mm thickness, magnets.</p><p>Glue a magnet in each of the spindle and spindle holder, ensuring that they have the correct pole directions.</p></div>

Small Magnetic Wool Spindle