Folding Dice Tray

A simple Folding Dice Tray for Rolling Dice Box. This was designed to fit in 3d-printy's Rollup Dice Box (Large) https://www.thingiverse.com/thing:5936518 plain bins.
This is still a WIP as far as being compatible with the dice box, still experimenting with the best print thickness (I didn't account for the added thickness of the fabric material for each time it folds)

by design you will need 3x body pieces, 2x side pieces, 2x end pieces, and 4x mag pieces.

You'll want to make 2x spacers to consistently lineup/space the body and side pieces 5mm apart

Additionally you will need 32x 5mm x 1mm Magnets and some material of 1mm thickness or less (so as to not contribute too much thickness when folded to fit into plain bin) I used some pleather from amazon (0.9mm-1.0mm)

(I originally tried 8mm x 1mm magnets I also had in order to use less magnets but those were somehow so weak, they barely worked through 1 layer of masking tape...so here we are at several 5mm ones.)

*Current pictures are of my test piece using what I had on hand (some Felt with self adhesive, and some masking tape) which is a little thick and springy so it doesn't fit in the bin yet...I have to wait for the pleather to arrive then I can construct proper and update photos...just wanted to go a head and get this posted.

I have not tested the Smaller variant yet, but use the same End and Spacer as normal but the small body, mag, and sides.

11/18: Added Version 2; This version is meant to fit in the plain bin in the other orientation...The original should 'stack' into the bin, this new version fits in the bin 90 decrees relative to the original like a book on a shelf (spin out)

11/20: New Normal pieces; now thinner for better fit.

I have mostly given up on this since I could not get it to work the way I wanted with the fabrics/materials I had. I have since moved on to a much simpler solution https://www.thingiverse.com/thing:7227719