Wristwatch Wall Holder wall clock – Armbanduhr Wandhalterung Halterung with mit Schraubstock screw-vise screw fixture industrial Ständer wall-clock

Screw-Hole is 1.055 scaled just for your information it is very difficult to screw the screws in, but maybe you'll find a way
You should print on finest setting, or maybe use a SLA pinter if you possess one ...blender project file attached for make a more stable struts in the ExzenterGuide_Height ... Or leave it as it is
You will need M3 Screws for the Wall-Mount (Hole is 3.5⌀[mm] in Blender)

You will need TO print:

• Wristband-Holder1_fixed (Print with PLA with 101% because of the screw)
• Exzenter-Guide_Height (This is the thing that holds the gear and the worm simultan. )
• nurGewinde (This is the screw you have to insert a lego axis into, i haven't test it, the medium or the smaller one. The thickness your watch is approximately 4-5 [mm] i mean where the wirstBAND is..) I will edit my exp.

You will need at home:

• Lego Gear Or look in remix it is called bbStock24TGear.stl
• Lego axis, cross-axis Or look in remix it is called Lego_Technic_421180555mm.stl
• Lego Worm Or look in remix it called bbWormGear.stl

Advertisement text:
I had no place where i could put my digital wristwatch out of the way... Don't shoot me. It was my first time bending in Blender with the remix: watch-holder from the remix. Because of my felonious untidytalentpool I decided to bring a wristwatch on the wall. They were laying around everywhere. I'll use the watch as a handy wall clock, as well, because some I don't wear so much, and in this fashion I look at the time when I leave the room or stand by the switch Light, take the keys, etc. In the photo is not my wristwatch shown.

• Wristband-Holder is the solo holder without any mechanics.
  Hɐʌǝ ɐ nıɔǝ pɐʎ :/)