Summary

This is to be used with an Intex air pump and HiBag vacuum storage bags. I wanted an easier way to vacuum out the air and mixed two designs together. Screw it into the bag first, then fit the pump into the adapter. I will probably taper the top a bit so it can be inserted easier.

This is the air pump I use:
https://a.co/d/almulGx

These are the storage bags I use:
https://a.co/d/cIBZNf5

Print Settings

Printer Brand:

Creality

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Ender 3 Pro</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>-</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>20%</p></div></p>                                                    <strong>Filament:</strong> - PLA                -                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Add supports and it should print just fine.</p></div>

Intex HiBag air vacuum bag nozzle adapter