QIDI Plus4 Lift Handle Opening Cap with Mount Option for Tools

Removing the QIDI Plus4 lift handles is necessary for using this Thing. They are easily removed by removing the 4 screws holding them in.

This thing is designed to cover the opening left on top of the printer once the handles are removed. The handles really only serve to allow you to remove the printer from the packaging and locate it where you want it. After that the handles are fairly useless and can be removed and stored. This leaves a hole on top of the printer. This is my attempt at covering those holes.

If you just want to cover both holes with the simple cap, print "Plus4 Handle Cap_v2.stl" twice. The "Plus4 Handle Cap_Mount_v2.stl" allows you to mount the box (for tools) and the hook (for spatula) on the side of the machine.

Including the OBJ files for easier mods/remixes.

Supports will be necessary on the Mount Cap and Hook. The box and basic cap can be printed without supports. The side of the box will need to be glued into place.

Material doesn't matter but I printed these in Overture Black PETG with a 20% Gyroid infill.