Summary

A little 12x Pill press, I needed it for a demonstration and didn't find much useful, so here's my version! :D
It properly needs some adjusting as for tolerances.

Print Settings

Printer Brand:

ELEGOO

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>ELEGOO NEPTUNE 4 Pro</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>99</p></div></p>                                                    <strong>Filament:</strong> Elegoo PETG                White                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>These Settings worked good for me:</p><h4>Profile Settings Changes</h4><ul><li><em>Initial Layer Height:</em> 0.3 (was 0.2)</li><li><em>Layer Height:</em> 0.2 (unchanged)</li><li><em>Build Plate Adhesion Type:</em> Brim (unchanged)</li><li><em>Build Plate Temperature:</em> 75 (was 70)</li><li><em>Printing Temperature:</em> 240 (was 215)</li><li><em>Support Structure:</em> Tree (was normal)</li><li><em>Generate Support:</em> True (was False)</li><li><em>Initial Layer Speed:</em> 20 (was 60)</li><li><em>Print Speed:</em> 60 (was 250)</li><li><em>Infill Density:</em> 20 (was 15)</li><li><em>Fan Speed:</em> 40 (was 100)</li><li><em>Retraction Speed:</em> 35 (was 45)</li><li><em>Retraction Extra Prime Amount:</em> 0.1 (was 0)</li><li><em>Retraction Distance:</em> 1 (was 0.5)</li></ul></div>

Pill Press