Modular Ice/Snow Plow Scraper (no supports)

Saw the design by ricswika and noted how unique it was, so I modified it to have no text, have a simpler design, and to be infinitely expandable.
Print the scraper head, and print either the scraper end or as many scraper extenders as you want. I would recommend not printing the end at all, in case you want to keep extending the scraper. I printed 3 extenders and found it to be long enough for most cars.

Dimensions: (all parts can fit on a 220x220)
Head: 16.82cm by 8cm by 5.64cm
Extender/End: 9.155cm by 21cm by 2cm

The base body of all of the parts is a 2cm (width across flats), and they connect with built-in screws, so it should be pretty easy to screw these together tightly. The screws are very strict, so you should only need 2 or 3 turns.

Directions: (do not print "Ice Scraper.3mf")
Print the head flat.
Print the extender either standing up on the top of the grip or flat along the long side.
Print the end standing up on the top of the grip.