1/16-1/4 shim set

basic 1.5" x 3" shims.. 1/16", 1/8", 3/16", 1/4"
sizes in inch/mm de-bossed on face.
i started putting 10mm pockets in them to glue neodymium mags in but gave up on that as it just wasnt necessary for what i needed them for.

i printed mine in PTEG with a properly leveled bed and good slicer settings, and they are really crisp and within +/- .005 or so.. close enough for my purposes. i imagine they would be just fine in PLA as well if not exposed to UV or excessive heat.

check back as i'll probably add more in 1/16" increments up to 1/2"