Customize Corner radius camfer jig with removable stoppers KIT

Note:
Ignore the print defects visible in the photo. For test printing I use old low-quality plastic scraps.

STL models are given as an example.

If you download this before 2024-12-12 - Download the radius.scad file again

Update 2024-12-12:

• fix some bugs
• refactoring code

Update 2024-12-08:

• fix some bugs
• add text labels
• add top/bottom chamfer

You can create two types of templates:

• 4 different jig in corners;
• 1 template for radius over 40 mm (outward and inward)

The following jig type can be set in each corner:

• Rounded corner;
• Chamfered corner;
• Rounding inward corner
• Rounded Elliptical corner;
• Chamfered Beveled corner;
• Rounding inward Elliptical corner

For the default parameters, fastening the stoppers with screws with an enlarged M3 head 8-12 mm long. For threading, I recommend using a hex head screw - as shown in the photo

This things can be made manually from plastic, plywood, etc.
To do this, select Print_Type = 2D draw in the settings.
Then export to PDF file. Print the drawing at 100% scale, stick it on the workpiece and cut out the things.

To use laser cutting/engraving, export 2D draw to the CAD file (DWG, SWG, OBJ etc.)