Multiboard Support for Kress 12V Battery Charger

Multiboard Support for Kress 12V Battery Charger Model KCH1202.
It is designed to be hold with two 13 mm Small Thread - Flat Head - T-Bolt to the board.

Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill, and supports for the pins (I printed it using auto tree support setting in Orca Slicer). I also recommend using a modifier cylinder in the slicer to set 100% infill in the pins area, to make it stronger. Apart from that, use your printer's default settings.

F3D and STEP files are also available.